I had a studio photoshoot booked for last weekend. Unfortunately, my model had to cancel due to ill health. It was too late to book another model. So I was in the unusual situation of actually having a free day, whilst also being in an experimental frame of mind. So I thought it might be…
Wishing you a very merry peaceful Christmas, followed by a happy, successful New Year. Creating this year’s card This year we wanted to do something a little different. So we decided to deploy Stable Diffusion open source artificial intelligence to generate the main image. Unfortunately AI is not good at drawing signs. So that was…
Creating the main image for this year’s Christmas card was not the straightforward “one-click deal” I hoped it would be. Seems synthetic stupidity is very much alive and kicking in the world of artificial intelligence. Fact is, AI is still not all that bright. In order to create the one successful image we finally chose,…
It’s quite an exciting time in the FOSS graphics world at the moment. After a long, long wait, GIMP 3.0 is finally at RC1 (first release candidate) stage. Debian 13 (Trixie aka Testing) users have just received the long-awaited KDE Plasma 6 desktop – with full Wayland support. Which I have to say that after…
One of my pet hates is the soft-touch rubberised coating some manufactures put on their kit. It invariably fails sooner or later. Indeed, I’ve had quite a lot of kit over the years where the rubberised coating has failed. Fortunately it is usually fixable – or to be more precise, removable. Depending on the coating’s…
I’m a clumsy clot and I’m always knocking my phone off my desk. OK it’s ruggedised and the floor is carpeted. Nevertheless, ruggedisation has its limits. Also my phone is a heavy old beast, weighing some 360 grams. That’s around 3/4 lb in “old money“. Which means that those flimsy plastic phone holders you see…
By which I mean testing my Tamron 500mm Catadioptric lens. It was a nice warm reasonably clear day today, peaking 24°C. So about an hour before sunset I took my Tamron, fitted on the front of my µ4/3 Lumix DMC-GX7 up to my favourite vantage point on Portsdown Hill, Hampshire. This is a wonderful place…
I was pleased to note that our collared doves have returned after several year’s absence. Of course I have no way of knowing if they are the same collared doves. But whoever they are, I’m rather fond of them and delighted to see them back in the garden again. Related Images:
Quite a lot of noise in the photography press regarding Ricoh Pentax’s new point and shoot film camera, the Pentax 17. And even more noise regarding its somewhat hefty price ticket: ÂŁ550. Choices However for me it would have to be a choice between one of these (below) Pentax ME SUper, or more likely a…
About a decade ago, I decided to go “mirrorless” – basically abandoning my heavy old Pentax DSLR and going for a system camera that is smaller and lighter. At the time I considered the new Fuji mirrorless offerings and micro four thirds. Problem was that at the time Fuji raw files would not work in…
I’ve been flirting with affordable LED in the studio for over a decade. And on each experiment, I’ve had change out of fifty quid. My latest sortie involved a pair of these things They have simple removable diffuser, reducing the need for a soft-box, they’re fairly robust and in addition to being dimmable they also…
I suffered my first hard disk failure way back in 1987. Fortunately I recovered 99% of my data. However, successful recovery required quite a lengthy struggle and a somewhat inelegant bodge. Since then, I’ve held something of a fascination, some might even say an obsession with backup systems. Over the years, I have tried all…
A thread on a photographic forum to which I belong started me thinking about using gobos. I always liked the idea of a proper gobo projector, but for a modifier that I would likely only use occasionally, I didn’t like the cost. So I decided to have a look around to see if there were…
Today I decided to make my own affordable detachable camera and equipment lanyard straps. I used some cheap generic “Peak Design compatible” buckles, bought direct from China via Ali Express, together with some generic anchors from the same source. I also used some 25mm nylon webbing I’ve had kicking round for ages. Granted, perhaps bright…
Problem is that memory cards can and do fail – even the expensive ones. And of course the world is littered with fakes. Being a bit of an old skinflint, almost all my memory cards have come from Amazon or similar. But I always add one extra precautionary step to the process between purchase and…
Driving through the West Sussex countryside on my way back Chichester, I spotted this tiny stone Chapel, literally right in the middle of nowhere. The board outside read St Mary’s Church Sennicotts. But the odd thing is there is no other building near. Nearest building I could see was about 400 metres away. The church’s…
A couple of months back, a question was raised with regard to how to prevent cable connectors falling out of cameras during tethered shoots. Well my tethered shoots are almost always tethered wirelessly these days. However I do sometimes need to attach a power lead. As my wife reminded me, when we’ve done shoots with…
The subject of monopods was raised recently in a photographic forum to which I belong. As it happens, I was already flirting with the idea of using a walking stick as a monopod, to avoid the need to carry two sticks. I’m a lazy so-and-so at the best of times. I also have a habit…
Photographer pal changed the batteries in his dead YN565EX II speedlight flash gun. Unfortunately when he tried to witch it on, it didn’t work. He tried several sets of batteries. No luck. For those not familiar with the device, the Yongnuo YN565EX II is a relatively affordable battery-powered Chinese flash speedlight for both professional and…
Several people have contacted me privately and asked for information regarding how I actually mounted my 120-year-old Bausch & Lomb + Beck lens on my µ4/3 camera. I hope in this article to shed a little light on how one can make such an old lens and seemingly-incompatible lens actually stay on a modern mirrorless…
Regular readers may know that my 2023 Christmas project was to make this 120 year old Bausch & Lomb + Beck lens fit on my µ4/3 cameras and actually capture some pictures with it. Unfortunately, at the time, the weather was too wet to take the thing outdoors. Fortunately by early January the weather became…
Over Christmas I set myself a little task of trying to make a 120-year- old Bausch & Lomb + Beck lens fit on a fairly modern camera. The lens was given to me in the late 1980’s by one of my very first models. It was a nice thought but to be honest, I came…
I always rather fancied a decent 500mm catadioptric lens. I bought a cheap Korean one off eBay a few years back and frankly it was not very good. But the old Tamron 500mm mirror lens has quite a good reputation. And as luck would have it, one turned up cheap on eBay a few weeks…
My experience of street photography is to make oneself looks as insignificant and unprofessional as possible – which comes rather too naturally to me, TBH! 🙂 Kit should be small, light and ideally somewhat battered looking – a “distressed” look that most of my kit usually acquires after a few weeks’ service. No expensive-looking kit…
Bought a bundle of multifunction USB rechargeable LED lights from a supplier AliExpress. I actually a bought batch of both types shown below because I like them so much. I paid a bit over a fiver each for them. Quite amazing for their size, weight and cost. Tough, water-resistant and rechargeable via USB C, c/w…
