Slightly similar posts...
Setting up a home studio
ByGarfEditors note: this article is a few years old and there are updates and related posts that some readers may find helpful… 2016 – Converting inexpensive LED flood lights for use in the studio 2017 – Cheap but effective continuous studio lighting 2018 – Cheap and cheerful overhead camera mount for mirrorless camera 2019 –…
Escape to Hong Kong II – a bite of dum sung
ByGarfA very enjoyable meal with my pal’s Chinese girlfriend’s folks.
Debian Digital pictures Electronics Equipment General Journal Linux Modular Camera Project PhotographyA modular Debian GNU/Linux digital camera. Feasible or farcical?
ByGarfFollowing on from a discussion on a photographic forum who which I belong, an old hobby horse of mine raised its head again. Namely the possibility of building one’s own Debian GNU/Linux digital camera, using Raspberry Pi 5 single-board computer, or similar, and one of the camera modules that’s available for it. Or indeed some…
Icom IC-R20 radio scanner
ByGarfBeing a geeky type of chap, I generally find that the best way to guarantee that Santa puts a decent geek-friendly Christmas present in my stocking is to buy it myself! So this year I treated myself to an Icom IC-R20 hand-held, all-band communications receiver/scanner. I have always had a penchant for small communications receivers….
Trip from Mui Wo to Cheung Chau
ByGarfToday we took a boat trip from from Mui Wo to Cheung Chau, and had a bit of a wander.
Cleaning a camera CCD with a vacuum cleaner and a Lens Pen
ByGarfI had Fuji S1, S2 & S3, all of which had dust magnets for sensors! They would get dirty even if I did not remove the lenses, simply from the air that got sucked in by varying the focal length of the lens. However, I cleaned them quite successfully with a vacuum cleaner. However there…
